WE OFFER THE LARGEST RANGE OF
CALIBRATED 16mm PLYWOOD

OUR SPECIALITY


At Aryamman Interior’s our speciality lies in detailing at every stage, that makes us unique and different. Every stage our qualified and experienced team looks at every production detailing to ensure a quality product is manufactured and delivered to our customers. Our productions units are well equipped with the state-of-the art machinery and experienced workforce to produce products of high quality and standards. Our products not only offer peace of mind with assurance of quality but also value for money.

Our raw products before reaching our factory pass through the stages of Ward blocking, Cooking, Peeling, Reeling and Clipping. Once these are done they reach our factories after which the following processes are carried out:

DRYING


To the optimus level dryer reduces the moisture content. Drying is done at a uniform temperature and also destroys microorganisms that may have survived the cooking process.

RESIN


Best quality resin is used for different grades of material. Proper use of resin ensures uniform bonding & no delamination.

LAB


By experienced & Qualified technician – the plywood is of no defect.

GLUING AND ASSEMBLY


Wide cross core veneer and long panel veneer are layered and glued to give the plywood greater strength and dimensional stability.

PRE PRESS


The Pre-press is unique as it expands and stabilizes the layer to give a warp-free product. It also ensures uniform spread of the specially formulated chemicals within the layers.

HOT PRESS


Each board is put separately into Indias first automatic hot-press for polymerization at a pre-set temperature. This ensures uniform density at all points in the plywood. After hot-pressing the boards are cooled for 24 hours.

DIMENSIONAL CUTTING OR TRIMMING


The boards are trimmed horizontally and vertically. A unique technique of pre-cutting is used before the final cutting to ensure dimensional accuracy.

SANDING


Surface sanding is done in an automatic wide-belt sanding machine. This gives a smooth surface to the plywood, which helps in a good surface finish required for interiors.

CALIBRATED


Our entire range of Calibrated Plywood is manufactured using Full Core Full panel Hardwood Timber with Pre Press Techonolgy and Wide Belt Sander along with a multiple headed Calibrater to manufacture plywood which is free from undulations and a standard thickness range of 15.75mm to 16.25mm ie a variation of +/- 0.25mm instead of 5% thickness variation as allowed as per the Bureau of Indain Standards. Our highly calibrated range of 15.9mm to 16.1mm is possible for specified orders in our 100% Gurjan Club range in both BWR and BWP on request.

INSPECTION & DISPATCH


The plywood then comes for final inspection & dispatched to the various destination.


WHAT OUR CUSTOMER SAYS ABOUT US.


Scroll to Bottom
Scroll to Top